今天我重新写下这个方法吧sudo podman run --name freeipa -it \ --read-only \ -h ipa.chunhuatech.cn \ -v /opt/freeipa/data:/data:Z \ --sysctl net.ipv6.conf.all.disable_ipv60 \ -p 80:80 \ -p 443:443 \ -p 8443:8443 \ -p 8080:8080 \ -p 389:389 \ -p 636:636 \ -p 88:88 \ -p 464:464 \ -p 123:123 \ quay.io/freeipa/freeipa-server:almalinux-10 \ ipa-server-install \ --ds-password !QAZWSX3edc4rfv \ --admin-password !QAZWSX3edc4rfv需要创建/opt/freeipa/data目录。域名地址需要使用真实的域名解析地址。然后启动这个容器在这个过程中需要输入一些信息。参考下面的内容。有个地方容易卡住需要等待一段时间。FreeIPA是Linux开源安全解决方案提供用户账户管理和集中身份验证。FreeIPA在CentOS 7、Fedora和Ubuntu14.04 /16.04上能够非常直接地将计算机添加到您的IPA域中。其他操作系统可以使用SSSD或LDAP对FreeIPA进行身份验证。freeIPA的部署1、设置主机名hostnamectl set-hostname ipaserver.changchunhua.cloud2、升级软件和系统内核yum update -y3、设置防火墙systemctl stop firewalld systemctl disable firewalld4、配置hosts文件vim /etc/hosts 192.168.17.120 ipaserver.changchunhua.cloud ipaserver5、配置随机数生成器yum install -y rng-tools systemctl start rngd systemctl enable rngd systemctl status rngd6、安装Bind软件并启动yum -y install bind bind-utils bind-dyndb-ldap systemctl start named systemctl enable named systemctl status named vim /etc/resolv.conf nameserver 127.0.0.17、安装ipa-server软件包yum -y install ipa-server ipa-server-dns8、配置ipa-server:[rootipaserver ~]# ipa-server-install --allow-zone-overlap The log file for this installation can be found in /var/log/ipaserver-install.log This program will set up the IPA Server. This includes: * Configure a stand-alone CA (dogtag) for certificate management * Configure the Network Time Daemon (ntpd) * Create and configure an instance of Directory Server * Create and configure a Kerberos Key Distribution Center (KDC) * Configure Apache (httpd) * Configure the KDC to enable PKINIT To accept the default shown in brackets, press the Enter key. Do you want to configure integrated DNS (BIND)? [no]: yes Enter the fully qualified domain name of the computer on which youre setting up server software. Using the form hostname.domainname Example: master.example.com. Server host name [ipaserver.changchunhua.cloud]: Warning: skipping DNS resolution of host ipaserver.changchunhua.cloud The domain name has been determined based on the host name. Please confirm the domain name [changchunhua.cloud]: The kerberos protocol requires a Realm name to be defined. This is typically the domain name converted to uppercase. Please provide a realm name [CHANGCHUNHUA.CLOUD]: Certain directory server operations require an administrative user. This user is referred to as the Directory Manager and has full access to the Directory for system management tasks and will be added to the instance of directory server created for IPA. The password must be at least 8 characters long. Directory Manager password: Password (confirm): The IPA server requires an administrative user, named admin. This user is a regular system account used for IPA server administration. IPA admin password: Password (confirm): Checking DNS domain changchunhua.cloud., please wait ... Do you want to configure DNS forwarders? [yes]: Following DNS servers are configured in /etc/resolv.conf: 127.0.0.1, 8.8.8.8 Do you want to configure these servers as DNS forwarders? [yes]: All DNS servers from /etc/resolv.conf were added. You can enter additional addresses now: Enter an IP address for a DNS forwarder, or press Enter to skip: Checking DNS forwarders, please wait ... Do you want to search for missing reverse zones? [yes]: Do you want to create reverse zone for IP 192.168.17.140 [yes]: Please specify the reverse zone name [17.168.192.in-addr.arpa.]: Using reverse zone(s) 17.168.192.in-addr.arpa. The IPA Master Server will be configured with: Hostname: ipaserver.changchunhua.cloud IP address(es): 192.168.17.140 Domain name: changchunhua.cloud Realm name: CHANGCHUNHUA.CLOUD BIND DNS server will be configured to serve IPA domain with: Forwarders: 127.0.0.1, 8.8.8.8 Forward policy: only Reverse zone(s): 17.168.192.in-addr.arpa. Continue to configure the system with these values? [no]: yes The following operations may take some minutes to complete. Please wait until the prompt is returned. Configuring NTP daemon (ntpd) [1/4]: stopping ntpd [2/4]: writing configuration [3/4]: configuring ntpd to start on boot [4/4]: starting ntpd Done configuring NTP daemon (ntpd). Configuring directory server (dirsrv). Estimated time: 30 seconds [1/45]: creating directory server instance [2/45]: enabling ldapi [3/45]: configure autobind for root [4/45]: stopping directory server [5/45]: updating configuration in dse.ldif [6/45]: starting directory server [7/45]: adding default schema [8/45]: enabling memberof plugin [9/45]: enabling winsync plugin [10/45]: configure password logging [11/45]: configuring replication version plugin [12/45]: enabling IPA enrollment plugin [13/45]: configuring uniqueness plugin [14/45]: configuring uuid plugin [15/45]: configuring modrdn plugin [16/45]: configuring DNS plugin [17/45]: enabling entryUSN plugin [18/45]: configuring lockout plugin [19/45]: configuring topology plugin [20/45]: creating indices [21/45]: enabling referential integrity plugin [22/45]: configuring certmap.conf [23/45]: configure new location for managed entries [24/45]: configure dirsrv ccache [25/45]: enabling SASL mapping fallback [26/45]: restarting directory server [27/45]: adding sasl mappings to the directory [28/45]: adding default layout [29/45]: adding delegation layout [30/45]: creating container for managed entries [31/45]: configuring user private groups [32/45]: configuring netgroups from hostgroups [33/45]: creating default Sudo bind user [34/45]: creating default Auto Member layout [35/45]: adding range check plugin [36/45]: creating default HBAC rule allow_all [37/45]: adding entries for topology management [38/45]: initializing group membership [39/45]: adding master entry [40/45]: initializing domain level [41/45]: configuring Posix uid/gid generation [42/45]: adding replication acis [43/45]: activating sidgen plugin [44/45]: activating extdom plugin [45/45]: configuring directory to start on boot Done configuring directory server (dirsrv). Configuring Kerberos KDC (krb5kdc) [1/10]: adding kerberos container to the directory [2/10]: configuring KDC [3/10]: initialize kerberos container [4/10]: adding default ACIs [5/10]: creating a keytab for the directory [6/10]: creating a keytab for the machine [7/10]: adding the password extension to the directory [8/10]: creating anonymous principal [9/10]: starting the KDC [10/10]: configuring KDC to start on boot Done configuring Kerberos KDC (krb5kdc). Configuring kadmin [1/2]: starting kadmin [2/2]: configuring kadmin to start on boot Done configuring kadmin. Configuring ipa-custodia [1/5]: Making sure custodia container exists [2/5]: Generating ipa-custodia config file [3/5]: Generating ipa-custodia keys [4/5]: starting ipa-custodia [5/5]: configuring ipa-custodia to start on boot Done configuring ipa-custodia. Configuring certificate server (pki-tomcatd). Estimated time: 3 minutes [1/30]: configuring certificate server instance [2/30]: secure AJP connector [3/30]: reindex attributes [4/30]: exporting Dogtag certificate store pin [5/30]: stopping certificate server instance to update CS.cfg [6/30]: backing up CS.cfg [7/30]: disabling nonces [8/30]: set up CRL publishing [9/30]: enable PKIX certificate path discovery and validation [10/30]: starting certificate server instance [11/30]: configure certmonger for renewals [12/30]: requesting RA certificate from CA [13/30]: setting audit signing renewal to 2 years [14/30]: restarting certificate server [15/30]: publishing the CA certificate [16/30]: adding RA agent as a trusted user [17/30]: authorizing RA to modify profiles [18/30]: authorizing RA to manage lightweight CAs [19/30]: Ensure lightweight CAs container exists [20/30]: configure certificate renewals [21/30]: configure Server-Cert certificate renewal [22/30]: Configure HTTP to proxy connections [23/30]: restarting certificate server [24/30]: updating IPA configuration [25/30]: enabling CA instance [26/30]: migrating certificate profiles to LDAP [27/30]: importing IPA certificate profiles [28/30]: adding default CA ACL [29/30]: adding ipa CA entry [30/30]: configuring certmonger renewal for lightweight CAs Done configuring certificate server (pki-tomcatd). Configuring directory server (dirsrv) [1/3]: configuring TLS for DS instance [2/3]: adding CA certificate entry [3/3]: restarting directory server Done configuring directory server (dirsrv). Configuring ipa-otpd [1/2]: starting ipa-otpd [2/2]: configuring ipa-otpd to start on boot Done configuring ipa-otpd. Configuring the web interface (httpd) [1/22]: stopping httpd [2/22]: setting mod_nss port to 443 [3/22]: setting mod_nss cipher suite [4/22]: setting mod_nss protocol list to TLSv1.2 [5/22]: setting mod_nss password file [6/22]: enabling mod_nss renegotiate [7/22]: disabling mod_nss OCSP [8/22]: adding URL rewriting rules [9/22]: configuring httpd [10/22]: setting up httpd keytab [11/22]: configuring Gssproxy [12/22]: setting up ssl [13/22]: configure certmonger for renewals [14/22]: importing CA certificates from LDAP [15/22]: publish CA cert [16/22]: clean up any existing httpd ccaches [17/22]: configuring SELinux for httpd [18/22]: create KDC proxy config [19/22]: enable KDC proxy [20/22]: starting httpd [21/22]: configuring httpd to start on boot [22/22]: enabling oddjobd Done configuring the web interface (httpd). Configuring Kerberos KDC (krb5kdc) [1/1]: installing X509 Certificate for PKINIT Done configuring Kerberos KDC (krb5kdc). Applying LDAP updates Upgrading IPA:. Estimated time: 1 minute 30 seconds [1/10]: stopping directory server [2/10]: saving configuration [3/10]: disabling listeners [4/10]: enabling DS global lock [5/10]: disabling Schema Compat [6/10]: starting directory server [7/10]: upgrading server [8/10]: stopping directory server [9/10]: restoring configuration [10/10]: starting directory server Done. Restarting the KDC Configuring DNS (named) [1/12]: generating rndc key file [2/12]: adding DNS container [3/12]: setting up our zone [4/12]: setting up reverse zone [5/12]: setting up our own record [6/12]: setting up records for other masters [7/12]: adding NS record to the zones [8/12]: setting up kerberos principal [9/12]: setting up named.conf [10/12]: setting up server configuration [11/12]: configuring named to start on boot [12/12]: changing resolv.conf to point to ourselves Done configuring DNS (named). Restarting the web server to pick up resolv.conf changes Configuring DNS key synchronization service (ipa-dnskeysyncd) [1/7]: checking status [2/7]: setting up bind-dyndb-ldap working directory [3/7]: setting up kerberos principal [4/7]: setting up SoftHSM [5/7]: adding DNSSEC containers [6/7]: creating replica keys [7/7]: configuring ipa-dnskeysyncd to start on boot Done configuring DNS key synchronization service (ipa-dnskeysyncd). Restarting ipa-dnskeysyncd Restarting named Updating DNS system records Configuring client side components Using existing certificate /etc/ipa/ca.crt. Client hostname: ipaserver.changchunhua.cloud Realm: CHANGCHUNHUA.CLOUD DNS Domain: changchunhua.cloud IPA Server: ipaserver.changchunhua.cloud BaseDN: dcchangchunhua,dccloud Skipping synchronizing time with NTP server. New SSSD config will be created Configured sudoers in /etc/nsswitch.conf Configured /etc/sssd/sssd.conf trying https://ipaserver.changchunhua.cloud/ipa/json [try 1]: Forwarding schema to json server https://ipaserver.changchunhua.cloud/ipa/json trying https://ipaserver.changchunhua.cloud/ipa/session/json [try 1]: Forwarding ping to json server https://ipaserver.changchunhua.cloud/ipa/session/json [try 1]: Forwarding ca_is_enabled to json server https://ipaserver.changchunhua.cloud/ipa/session/json Systemwide CA database updated. Adding SSH public key from /etc/ssh/ssh_host_rsa_key.pub Adding SSH public key from /etc/ssh/ssh_host_ecdsa_key.pub Adding SSH public key from /etc/ssh/ssh_host_ed25519_key.pub [try 1]: Forwarding host_mod to json server https://ipaserver.changchunhua.cloud/ipa/session/json SSSD enabled Configured /etc/openldap/ldap.conf Configured /etc/ssh/ssh_config Configured /etc/ssh/sshd_config Configuring changchunhua.cloud as NIS domain. Client configuration complete. The ipa-client-install command was successful Setup complete Next steps: 1. You must make sure these network ports are open: TCP Ports: * 80, 443: HTTP/HTTPS * 389, 636: LDAP/LDAPS * 88, 464: kerberos * 53: bind UDP Ports: * 88, 464: kerberos * 53: bind * 123: ntp 2. You can now obtain a kerberos ticket using the command: kinit admin This ticket will allow you to use the IPA tools (e.g., ipa user-add) and the web user interface. Be sure to back up the CA certificates stored in /root/cacert.p12 These files are required to create replicas. The password for these files is the Directory Manager password9、验证freeIPA服务功能通过尝试为admin用户初始化kerberos令牌来验证Kerberos域是否已正确安装。[rootvm1 ~]# kinit admin Password for adminTMP.GCE.CLOUDERA.COM: [rootipaserver ~]# klist Ticket cache: KEYRING:persistent:0:0 Default principal: adminCHANGCHUNHUA.CLOUD Valid starting Expires Service principal 11/12/2022 02:32:36 11/13/2022 02:32:33 krbtgt/CHANGCHUNHUA.CLOUDCHANGCHUNHUA.CLOUD10、验证IPA服务器是否正常运行[rootipaserver ~]# ipa user-find admin -------------- 1 user matched -------------- User login: admin Last name: Administrator Home directory: /home/admin Login shell: /bin/bash Principal alias: adminCHANGCHUNHUA.CLOUD UID: 229800000 GID: 229800000 Account disabled: False ---------------------------- Number of entries returned 1 ----------------------------然后我这边通过浏览器访问https://ipaserver.changchunhua.cloud/ipa/ui出现问题。这个问题我估计是什么DNS的问题。更新了电脑上的DNS的配置。然后就能看到这个页面了。通过ping命令可以解析成功。使用admin的账号和配置的密码登录11、查看IPA组件状态[rootipaserver ~]# ipactl status Directory Service: RUNNING krb5kdc Service: RUNNING kadmin Service: RUNNING named Service: RUNNING httpd Service: RUNNING ipa-custodia Service: RUNNING ntpd Service: RUNNING pki-tomcatd Service: RUNNING ipa-otpd Service: RUNNING ipa-dnskeysyncd Service: RUNNING ipa: INFO: The ipactl command was successful[rootipaserver ~]# ipactl --help Usage: ipactl start|stop|restart|status Options: -h, --help show this help message and exit -d, --debug Display debugging information -f, --force Force IPA to start. Combine options --skip-version- check and --ignore-service-failures --ignore-service-failures If any service start fails, do not rollback the services, continue with the operation --skip-version-check skip version check2023年3月6日然后我这边再试着按照docker的方式来部署freeIPAdocker run --rm --name freeipa -ti \ --read-only \ --sysctl net.ipv6.conf.all.disable_ipv60 \ -h ipaserver.changchunhua.cloud \ -p 443:443 -p 8009:389 \ -v /sys/fs/cgroup:/sys/fs/cgroup:ro \ -v /data/webapps/ipa:/data:Z \ freeipa/freeipa-server:centos-8-stream